A problem is developing with the transition to electric heating: peak demand. Learn how air-to-water heat pumps tackle seasonal needs but struggle during extreme cold, leading to reliance on electric resistance heating.
Like most people, I have opinions and beliefs about our current energy sources, and specifically how they play into the future of hydronic heating and cooling technology.
System COP is a more relevant metric of geothermal heat pump performance since the owner is paying for the electrical energy to operate the heat pump and the circulator, and their operation is always simultaneous.
The goal is to keep the system COP as high a possible as the operating conditions of the heat pump change. The logic behind maximum COP tracking is to continually look for an earth loop flow rate that improves the system COP.
Every year, manufacturers develop new or improved products for the North American hydronic market. Product development planning by those manufacturers depends on several factors. Here are a few of the main considerations.
Multiple boiler systems have been used for decades. They allow full heating capacity to be delivered when necessary, while also retaining high efficiency under partial load conditions compared to a single large boiler.
When a fixed output heat pump supplies a highly zoned heating or cooling distribution system, a buffer tank is typically used to prevent the heat pump from short-cycling under very low load conditions.
ades of dealing with hydronic systems, I’ve confirmed two characteristics that always govern their operation. Both are rooted in the tenants of thermodynamics. Neither should be thought of as mysterious.
Those who evaluate the performance of HVAC source equipment such as boilers, furnaces and heat pumps have to work with a wide variety of acronyms. Some of them were spawned by government bureaucrats, mostly the U.S. Department of Energy (DOE). Others were created through a consensus process based on input from manufacturers and other industry stakeholders.