Franklin Electric Showroom
Little Giant now makes its own basins for collection around its line of sump pumps. Because they are made in-house, every step of the manufacturing process is controlled, from the quality of the polyethylene and roto-molding to the basin finishing. This means that the Little Giant quality you are accustomed to experiencing in their pump line is available on the inside as well as the outside. Systems include a Little Giant 9SN or 10SN Series sewage ejector pump capable of handling liquid and solid waste up to 2” in diameter.
Features and Benefits:
- 4/10 hp or 1/2 hp sewage pump with overload protection
- Larger 44-gallon capacity extends pump life by reducing cycles
- Roto-molded 20” x 30” (51 cm x 76 cm) or 24” x 24” (61 cm x 61 cm) polyethylene basin with ribs for added strength allows for 44-gallon capacity
- 4” (10.2 cm) molded external inlet hub for flexible coupling
- Durable, corrosion resistant one- and two-piece structural foam covers. Available with slip-fit or bolt-on vent and discharge flanges. (Two-piece available with bolt-on flanges only.)
- 360º molded handle for ease of transport
- Radial rib design for added strength
- Molded torque stops at basin bottom to secure pump
- Available with indoor alarms. (Alarm float preset at factory on pre-assembled units.)
- Available pre-packaged or pre-assembled
For more information on this and other Little Giant products, visit: http://www.franklin-electric.com/little-giant-wastewater/simplex-packaged-systems.aspx
http://www.franklin-electric.com/little-giant-wastewater/simplex-packaged-systems.aspx<table align="right" border="0" cellpadding="1" cellspacing="1" style="width: 200px;">
<tbody>
<tr>
<td style="text-align: center;">
<img alt="pitplus" src="/ext/resources/PME/2013/May/sht0613Showroom_PitPlus2-180px.jpg" style="width: 166px; height: 180px;" /></td>
</tr>
<tr>
<td>
</td>
</tr>
</tbody>
</table>
<p>
</p>
<p>
Little Giant now makes its own basins for collection around its line of sump pumps. Because they are made in-house, every step of the manufacturing process is controlled, from the quality of the polyethylene and roto-molding to the basin finishing. This means that the Little Giant quality you are accustomed to experiencing in their pump line is available on the inside as well as the outside. Systems include a Little Giant 9SN or 10SN Series sewage ejector pump capable of handling liquid and solid waste up to 2” in diameter.</p>
<p>
</p>
<p>
<strong>Features and Benefits:</strong></p>
<ul>
<li>
4/10 hp or 1/2 hp sewage pump with overload protection</li>
<li>
Larger 44-gallon capacity extends pump life by reducing cycles</li>
<li>
Roto-molded 20” x 30” (51 cm x 76 cm) or 24” x 24” (61 cm x 61 cm) polyethylene basin with ribs for added strength allows for 44-gallon capacity</li>
<li>
4” (10.2 cm) molded external inlet hub for flexible coupling</li>
<li>
Durable, corrosion resistant one- and two-piece structural foam covers. Available with slip-fit or bolt-on vent and discharge flanges. (Two-piece available with bolt-on flanges only.)</li>
<li>
360º molded handle for ease of transport</li>
<li>
Radial rib design for added strength</li>
<li>
Molded torque stops at basin bottom to secure pump</li>
<li>
Available with indoor alarms. (Alarm float preset at factory on pre-assembled units.)</li>
<li>
Available pre-packaged or pre-assembled</li>
</ul>
<p>
</p>
<table align="right" border="0" cellpadding="1" cellspacing="1" style="width: 200px;">
<tbody>
<tr>
<td>
<img alt="franklin electric" src="/ext/resources/PME/2013/May/sht0613Showroom_LittleGiant-logo-166px.jpg" style="width: 166px; height: 24px;" /></td>
</tr>
<tr>
<td>
</td>
</tr>
</tbody>
</table>
<p>
</p>
<p>
For more information on this and other Little Giant products, visit: <a href="http://www.franklin-electric.com/little-giant-wastewater/simplex-packaged-systems.aspx">http://www.franklin-electric.com/little-giant-wastewater/simplex-packaged-systems.aspx</a></p><table align="right" border="0" cellpadding="1" cellspacing="1" style="width: 200px;">
<tbody>
<tr>
<td style="text-align: center;">
<img alt="pitplus" src="/ext/resources/PME/2013/May/sht0613Showroom_PitPlus2-180px.jpg" style="width: 166px; height: 180px;" /></td>
</tr>
<tr>
<td>
</td>
</tr>
</tbody>
</table>
<p>
</p>
<p>
Little Giant now makes its own basins for collection around its line of sump pumps. Because they are made in-house, every step of the manufacturing process is controlled, from the quality of the polyethylene and roto-molding to the basin finishing. This means that the Little Giant quality you are accustomed to experiencing in their pump line is available on the inside as well as the outside. Systems include a Little Giant 9SN or 10SN Series sewage ejector pump capable of handling liquid and solid waste up to 2” in diameter.</p>
<p>
</p>
<p>
<strong>Features and Benefits:</strong></p>
<ul>
<li>
4/10 hp or 1/2 hp sewage pump with overload protection</li>
<li>
Larger 44-gallon capacity extends pump life by reducing cycles</li>
<li>
Roto-molded 20” x 30” (51 cm x 76 cm) or 24” x 24” (61 cm x 61 cm) polyethylene basin with ribs for added strength allows for 44-gallon capacity</li>
<li>
4” (10.2 cm) molded external inlet hub for flexible coupling</li>
<li>
Durable, corrosion resistant one- and two-piece structural foam covers. Available with slip-fit or bolt-on vent and discharge flanges. (Two-piece available with bolt-on flanges only.)</li>
<li>
360º molded handle for ease of transport</li>
<li>
Radial rib design for added strength</li>
<li>
Molded torque stops at basin bottom to secure pump</li>
<li>
Available with indoor alarms. (Alarm float preset at factory on pre-assembled units.)</li>
<li>
Available pre-packaged or pre-assembled</li>
</ul>
<p>
</p>
<table align="right" border="0" cellpadding="1" cellspacing="1" style="width: 200px;">
<tbody>
<tr>
<td>
<img alt="franklin electric" src="/ext/resources/PME/2013/May/sht0613Showroom_LittleGiant-logo-166px.jpg" style="width: 166px; height: 24px;" /></td>
</tr>
<tr>
<td>
</td>
</tr>
</tbody>
</table>
<p>
</p>
<p>
For more information on this and other Little Giant products, visit: <a href="http://www.franklin-electric.com/little-giant-wastewater/simplex-packaged-systems.aspx">http://www.franklin-electric.com/little-giant-wastewater/simplex-packaged-systems.aspx</a></p><table align="right" border="0" cellpadding="1" cellspacing="1" style="width: 200px;">
<tbody>
<tr>
<td style="text-align: center;">
<img alt="pitplus" src="/ext/resources/PME/2013/May/sht0613Showroom_PitPlus2-180px.jpg" style="width: 166px; height: 180px;" /></td>
</tr>
<tr>
<td>
</td>
</tr>
</tbody>
</table>
<p>
</p>
<p>
Little Giant now makes its own basins for collection around its line of sump pumps. Because they are made in-house, every step of the manufacturing process is controlled, from the quality of the polyethylene and roto-molding to the basin finishing. This means that the Little Giant quality you are accustomed to experiencing in their pump line is available on the inside as well as the outside. Systems include a Little Giant 9SN or 10SN Series sewage ejector pump capable of handling liquid and solid waste up to 2” in diameter.</p>
<p>
</p>
<p>
<strong>Features and Benefits:</strong></p>
<ul>
<li>
4/10 hp or 1/2 hp sewage pump with overload protection</li>
<li>
Larger 44-gallon capacity extends pump life by reducing cycles</li>
<li>
Roto-molded 20” x 30” (51 cm x 76 cm) or 24” x 24” (61 cm x 61 cm) polyethylene basin with ribs for added strength allows for 44-gallon capacity</li>
<li>
4” (10.2 cm) molded external inlet hub for flexible coupling</li>
<li>
Durable, corrosion resistant one- and two-piece structural foam covers. Available with slip-fit or bolt-on vent and discharge flanges. (Two-piece available with bolt-on flanges only.)</li>
<li>
360º molded handle for ease of transport</li>
<li>
Radial rib design for added strength</li>
<li>
Molded torque stops at basin bottom to secure pump</li>
<li>
Available with indoor alarms. (Alarm float preset at factory on pre-assembled units.)</li>
<li>
Available pre-packaged or pre-assembled</li>
</ul>
<p>
</p>
<table align="right" border="0" cellpadding="1" cellspacing="1" style="width: 200px;">
<tbody>
<tr>
<td>
<img alt="franklin electric" src="/ext/resources/PME/2013/May/sht0613Showroom_LittleGiant-logo-166px.jpg" style="width: 166px; height: 24px;" /></td>
</tr>
<tr>
<td>
</td>
</tr>
</tbody>
</table>
<p>
</p>
<p>