Bonomi North America introduces a new range of lead-free, three-way direct-mount brass ball valve packages with a choice of factory-installed electric or pneumatic actuators. The valves are approved under the NSF standard 61/372 for potable water use. The low-torque ball valves are available in both “T” and “L” configurations in sizes 1/4” through 3”. The “T” port with its four-seated design provides straight-through flow, diversion and complete shutoff capability. The “L” port also is four-seated, allowing the use of any port as an entry. The valves feature lead-free forged brass bodies that are stronger and lighter than typical sand-cast bodies. Standard chrome-plated balls and blowout-proof stems, PTFE seats and double O-ring steam seals assure leak-free service. Maximum working pressure is 400 WOG. The valves are 100% electronically tested in open and closed position at 80 psi. Bonomi North America. www.bonominorthamerica.com