Drop-in drain kit from Americh
With Americh’s new Drop-In Drain kit, the installation of freestanding bathtubs is greatly simplified. When using the dropin drain there is no need for an access panel and the tub can be installed as close to the wall as possible. The process is now as simple as placing the tub, tracing its location on the floor, marking the location of the drain over the plumbing trap and cutting the hole in the subfloor and dropping in the installation kit. There is a reusable cap allowing for multiple pressure tests and once it is removed, it is simply a matter of dropping the tub and its tailpiece into the unit. If any further adjustments are needed the plate can be uninstalled.