Regulations have been a big topic over the past several years. Politicians, trying to make a public name, have been pushing for the reduction of regulations. They like to claim that these regulations are an impediment to economic growth and entry into certain professions. While some of this may have merit, one needs to “not throw out the baby with the bath water.”
Let us get down in the dirt, or at least “backfill.” A recent discussion on ASPE Connect’s “Open Forum” was entitled “Minimum Pipe Cover when Calculating Invert Under Building Slab for PVC Sanitary.”
Recently, I wrote about plumbing pipe thermal expansion and expansion fittings. Based upon feedback from some in the design community, there seems to be a feeling that more design professionals within the consulting industry need to have a better foundation to enhance their understanding of the topic.
Recently, there was a discussion on the ASPE Open Forum regarding, “Plumbing Pipe Thermal Expansion and Expansion Fitting.” Generally, this topic would be found within your specifications under Section 22 05 16, “Expansion Fittings and Loops for Plumbing Piping;” this topic is under-discussed, and in many cases, poorly understood by many designers and engineers.